Staying in Rockford,Il then on up to Rochester, MN. Looking at an alternative to I-90 during a cross country trip and wonder if someone could tell me how it would be to go 20, 18 and 52 instead. I'd be pulling a 29' travel trailer. Is the road good a...
Hi All, I have reservations at Grizzly RV Park for June 5th. Google maps showing the most direct route being I-90. I'm hoping for a few suggestions for a few must see stops along I-90 prior to getting to South Dakota. Time is not an issue but I'm th...
Question about when a towing company uses their air system to charge a towed motorhome through the external charge port. Their air isn't filtered by the coach air dryer so if they introduced moisture into the system could it be removed by draining th...
Hi all, I'm wiring up my truck to tow a travel trailer. I have the brake controller in and working and the tail, turn and brake lights work OK. It's a factory installed hitch and wiring. The only thing I don't have is 12V to the trailer so that it ...
Hi all, I have an older 1996 vintage travel trailer with a slide ( I just bought it). It has had a leak in the left front corner seam that has pretty much rotted a few feet of the floor and several studs in the front bedroom. What should I use for ...
bikendan wrote:jerem0621 wrote:My 2011 Tahoe was one of the early AFM engines how can your 2011 Tahoe have one of the early AFM engines when my 2007 Avalanche had the 5.3 AFM, 4 years before yours. It's 6 years earlier then mine
Thanks to all who replied. I'm definitely going to take a few of the suggestions especially dropping by Niagara Falls. One of the conundrums I have is not being able to stop an extra day here or there if you find an interesting place because the rese...
I like the Flying J's because they have the separate RV islands and RV parking so I look for them first when traveling. Most of the time though we end up using truck stops. We have the book The Next Exit which among other things lists the "RV friendl...
Mile High wrote:I would think their air is filtered through the drier on their own truck. When we were towed, it was his truck air he tapped into us. Likely that's the usually case but if you weren't sure and wanted to do something in a preventativ...
Thanks to all who replied. Got r done. The wire I needed was taped to the harness under the master cylinder, red with a white tracer. I secured it to the 6mm stud on the fuse box and put a 40 amp maxi fuse in at position 68. The fuse position is obvi...
