I want to remove the outside mirrors on a 1996 econoline 350. these are the heavy cast mounting base type that bolted thru . I see the upper bolts from the inside but the lower bolt is behind the door panel . does anyone know the way the p...
i just bought a 1996 class c last week and im trying to replace the bulb in the refrig. I cant seem to figure out how the lens comes down . i dont want to break the thing . it is a norcold 6 cu.ft. anyone know ?
hi folks, I just bought a used class c yesterday and im having trouble getting the heater to stay lit. this is a 1996 suburban unit. it tries and tries to start burning but it wont stay going, it just sparks and lights then goes out and sparks ...
you probably have an aluminum roof. dont be suprised if once up standing on it, you encounter sections where it has loosened from the wood sheeting under neath . A good coat of dicor will protect it for a few years .
the new toilet doesnt come with the flange. you can probably modify the existing one to work. i did using a dremel tool to cut new slots for the hold down bolts. you wont want to try to remove the old flange , that can open up a whole nother...
The water line will have to be lengthened and the mounting flange will Need to be changed or modified to accept the hold down bolts in the 3and 9o'clock positions instead of the 5and11o'clock pos. As it is now. It's best to buy a new one and make the...
watch putting aqua kem tank chemical in your toilet if you dump into your home septic system as it contains formaldehyde wich is bad for your septic tank.
