My front slide wouldnt go out it just clicked. I used the hand crank to get it started it made a pop noise but then started cranking out then went with the switch. Tried closeing it up but stopped several inches from closing tight. I crawled under ...
Im thinking about getting one of the metal carports installed for our TT. How wide did you get when you had yours installed? Im thinking of going with a 36x14. Our TT is 31' 35' over all with tongue it has two slides on the same side.
Vet Man wrote:Sometimes an assist from someone pushing on the outside will help until you can get it fixed. Thanks i just tried it and it didn't budge i am going to put a come a long on each end of the main guide bar with the roller and holes in it t...
38 chevy guy wrote:ScottG wrote:I think you may find you've lost a tooth or two off the small gear. Or, the shear bolt has broken but with is skipping and catching, it's more likely the small gear at one end. how hard is it to change the gear? Than...
ScottG wrote:I think you may find you've lost a tooth or two off the small gear. Or, the shear bolt has broken but with is skipping and catching, it's more likely the small gear at one end. how hard is it to change the gear? Thanks for the reply.
What do you full timers do during the day if you have no shop or barn to piddle in? Sounds fun but would get boring with only the camper to stay in and do things in. I would have a pile of stuff to get rid of before doing this. Congrats to y'all doin...
