as previously posted with help from this forum i have my fridge working once again on propane. (cleaned the burner). I do have a question on my flame however. I have never noticed if this is normal so here is my question. i guess I always thought tha...
Man i'm happy I found this site. i was having trouble with my fridge not cooling on propane. Worked fine on electric but on propane it would not cool. the flame was there but not cooling. Checked a few past posts and other members told/showed me how ...
ok I will try not to get too long with this. given the fact the gear is all the way in (retracted) and rv is hooked on the truck (reg f250 diesel no lift kit). I lower the gear approx 8-10". (I need this much out so I can lower it into level position...
bpounds wrote:You said you lubricated. Did that include the leadscrews and follower nuts inside the leg? On mine you can't get to those without disassembling the legs, or as I did, drill small holes in the upper housing. I use chain and cable lube in...
Well picked up a new motor. That seems to do the trick. Ran the landing gear up and down as if I was simulating hooking and unhooking and leveling. Never popped the fuse. The motor never sounded like it was laboring at the tail end of the lift like t...
While I towed with a gasser for years, I traded my gasser for a diesel. Someone in a previous post mentioned if the both a gasser and a diesel had the same horsepower the ease of pulling would be the same and understandingly so. However I have seen s...
