Ok, newbie here. Looking for input on those of you using a 1/2 ton truck to tow. Gas engine with tow/haul mode and manual shift option. When you are hooked up and towing your travel trailer, what are you going for tow/haul mode and shifting?I have...
So, we finally got our first travel trailer - a Grand Design Imagine 2800BH. Just picked it up last weekend and took it right out for a shake down run. So far, pretty much everything ok. Biggest issue we are having is that it doesn't pull smoothly...
mkirsch wrote:A 2016 Chevy Silverado 1500 has the grade braking feature, so you don't even need to shift manually for that.Yup, I have seen the message on the DIC and felt it kicking in. Works pretty decent as far as I can tell.
Was going to post those numbers, but if not needed...Here is what I had for measurements:1. Unloaded - ground to fender lip: 36.25"2. Loaded, no WD bars: 36.75"3. Loaded with WD bars: 36.5"So according to the Equal-i-zer manual, I am about perfect...
Ok, so have three weights now. Two were done today, one was from last weekend and think there was water in the fresh water tank that contributes to trailer weight difference. But the TV/TT had the issue both on way to campground (when there was wat...
Gotcha on the unloaded vs. loaded with WD bars attached front axle weight. That all makes sense.Trailer tires are at 65 psi cold as checked yesterday. Bumped truck tires to 42 psi front, 46 psi rear (max is 51 psi). Got the hitch ball height measu...
