I just installed a second AC in the fiver. This is a second unit so it is cool only, Coleman Mach15, ducted.I had a mobil RV help me with the installation and for reference he did the wiring will I was working on something else.Al of the modes work c...
Are the discharge opening, where the uunit mate with the duct the same size for 13.5 and 15K units. Wondering if new RVs are ducted with larger duct so that either size capacity can be instaled. Have a 15K AC and looking to add a second.
Here's the latest project, an upgrade to a second 30A service. I didn't go to 50A because of cost. Replacing the EMS, the 50A inlet, converter, and shore power cord would have been cost prohibitive and I'm able to use some of the items I had left ove...
DW has the idea that we need a small wood smoker to take along camping, and I have to admit that idea does have merit. Nobody loves a good brisket more that I do. My home smoker is too large to load and unload in the truck, so I'm thinking along the ...
If you have a conventional tow trailer with a tongue weight of 1000 and with a properly adjusted WD, 300lbs is transferred back to the steering axle and the remaining 700lbs is transferred back to the trailer axles, how much weight have you added to ...
Wow, some of these guys need to find a different website to get their information. Lots of posts in this thread that make absolutely no sense, posted just for the sake of posting something.Thank God Doug is around...
That is correct. I had to tie into a 12V wire for a ceiling light which Grand Design had pulled close to the location There was also a 115V wire there. This is standard on Grand Design units prewired for a 2nd AC.Anyway... Here's an update. As stated...
Jack_Diane_Freedom wrote:You might want to check out boat cords. They are much lighter and more flexible.No. Boat and RV cords are not interchangeable. The inlet end to the boat or RV is the same but the pedestal end is different.
Fuses have nothing to do with 115V power.GFIs will not reset if there is no voltage to them.Circuit breakers can and do go bad.To reset a C/B you have to push it all the way off and then push it on.Test the breaker by swapping it ith one of the other...
