Designer 35RLTS and Jayco Talk...Thanks Frank!!

[sanderson_66]

Since there does not currently seem to be a Jayco owners forum, Moderator Frank has graciously allowed this thread. It will be for discussing Jayco related questions and comments. Anything not Jayco related will be deleted. Sounds more than fair to me. Thank-you Frank!

[loydt]

Watch it Blue, I'll send another foot of snow up that way!!!!!

[M_GO_BLUE1]

Ok Loyd stop your whining...:)...if I had the bike rack setup I would send to you but I don't...

Changed the oil on the Onan genny this past weekend for the first time and I have a few tips...buy yourself about 2' of clear plastic tubing (forgot the size but will let you know) and connect this to the rubber hosing under the genny where to oil drains from (easier to place the oil receptacle on the ground with the extended length of hose)...have patience when refilling with the 2 quarts of oil as you can refill faster than the air is let out

I used 15-40 oil provided by Onan...

[L_MMusic]

We did try pulling down on each leg while turning the motor, to no avail. It does sound like it's running normally.
What kind of repair job (time/expense) is involved with a sheered pin?

[CHV_FRK]

Loydt...I'm sending you pics...although crappy from my cell, but enough for you to see. It is sandwiched between the hitch. Looking at how close it is to the tank I would say that you have a filler between that you need to take out.

L&MMusic. I would start by prying down a little on each foot to make sure they are not jammed up, or bend backward and hanging up. What is your motor doing? If it sounds like it's turning you've probably sheered the pin. If not you are jammed up somehow. Let us know what works out. If you didn't have bad luck........ 😛

[L_MMusic]

PS Loydt -- We like ya just fine...just don't have any input to offer.

[L_MMusic]

Oh...what did I do??? While leaving our friend's house today, we scraped the rear stablizers on the hill (just as we've done in the past in other places on occasion) and now they won't come down. Any hints, guys?

[loydt]

Yeah, I just want to see how they attached both to the same turn down bracket.

[CHV_FRK]

loydt.... I was actually thinking about you last night. (I'm not gay though, not that there's anything wrong with that.) 🙂 If we get over around our storage today I had already threw the camera into the truck to snap some pics. You just want to see the hitch mounting in relation to the stabilizing jacks? You don't really need pics of the bike rack itself correct?

[loydt]

loydt wrote:
Hey guys, I still need someone to post some pics of their factory installed receiver hitch (bike rack package) in conjunction with the rear stabilizers.
Thanks.

Nobody likes me.........everybody hates me...........

[cruz]

sirdrakejr wrote:
....I am trying to keep the amount of server space from being used just for repeats! :h

[traildog]

sirdrakejr wrote:

:B

[sirdrakejr]

[traildog]

cruz wrote:

traildog wrote:
Frank,

I feel like I'm being left out.........

Please delete my post, PLEASE!

traildog

Now Now Scott ... be nice ...

* This post was edited 05/08/08 05:31pm by ...... :h *

Frank knows I'm kidding!

[cruz]

traildog wrote:
Frank,

I feel like I'm being left out.........

Please delete my post, PLEASE!

traildog

Now Now Scott ... be nice ...

* This post was edited 05/08/08 05:31pm by ...... :h *

[traildog]

Frank,

I feel like I'm being left out.........

Please delete my post, PLEASE!

traildog