โJun-06-2016 05:49 AM
โJun-08-2016 07:05 AM
โJun-08-2016 06:14 AM
shepstone wrote:
I can't help but think that for a smaller person that with the Andersen it might be easier to reach the remote cable latch . Q to Andersen owners , is it easier to reach this pull latch than a handle in the bed of the truck?
โJun-08-2016 01:19 AM
jerem0621 wrote:
Probably the easiest to handle for you would be the Andersen Ultimate Fifth Wheel hitch. The hitch itself weighs around 40 lbs...it uses a ball and a socket...you back under the kingpin...drop the hitch on the ball... Twist the locking latch and you are done.
Here is a link to the Rail Mount Version
Here is a link to the Gooseneck Mount Ultimate Fifth wheel, but this version is about 75 lbs or so.
They even have an aluminum version that weighs less than 40 lbs.
If I were going with a light weight fiver this would be high on my list of possible hitches.
Thanks!
Jeremiah
โJun-07-2016 07:10 PM
โJun-07-2016 07:01 PM
sayoung wrote:shepstone wrote:
I can't help but think that for a smaller person that with the Andersen it might be easier to reach the remote cable latch . Q to Andersen owners , is it easier to reach this pull latch than a handle in the bed of the truck?
You mount the handle behind the pin box where you want. It's just a turn of the handle & pull/push.
They have an accessories cup that goes on the pin box so can be as much as 3 inchs off & still hookup, can't tell you positively as I haven't gotten around to putting it on . Keep forgetting to do it as no real problem aligning for me.
Also I have a step that goes in the receiver hitch so I leave it in place, extends and turns 90 degrees to go against bumper, Tractor Supply
โJun-07-2016 06:45 PM
shepstone wrote:
I can't help but think that for a smaller person that with the Andersen it might be easier to reach the remote cable latch . Q to Andersen owners , is it easier to reach this pull latch than a handle in the bed of the truck?
โJun-07-2016 06:08 PM
shepstone wrote:
I can't help but think that for a smaller person that with the Andersen it might be easier to reach the remote cable latch . Q to Andersen owners , is it easier to reach this pull latch than a handle in the bed of the truck?
โJun-07-2016 05:39 PM
โJun-07-2016 07:29 AM
Mamacast wrote:ljr wrote:Mamacast wrote:
Thanks all, I was more concerned with the actual attaching of the trailer to the hitch, our TT is quite rigorous with the stabilizers and wanted to see if one was easier than another. While the Anderson sounds like the ticket to get the hitch out of the truck I won't be tackling that, it was mainly to be able to attach and detach at the campsite. The suggestion for the wheel step is a great reminder. Thanks all!
Hitching a TT with a weight distributing hitch is much more work than a fifth wheel.
So that begs the question, can you hook up without a second person? My husband and I had to be a team to line up the TT ball hitch....
โJun-06-2016 04:52 PM
Me Again wrote:
One handle removal, mostly thumb! HF 880 lbs electric hoist. ChrisModerator edit to re-size picture to forum recommended limit of 640px maximum width.
โJun-06-2016 03:15 PM
โJun-06-2016 02:30 PM
Traveler II wrote:Mamacast wrote:Traveler II wrote:
There is a learning curve for any hitch. In the past we've had a Reese, moved up to a B&W and three years ago bought our Trailer Saver air hitch. Each was better but we really like the Trailer Saver for the way we RV. We have two sticks with a magnets, we put one on the hitch and one on the pin and it make it easy to like
up, works with any hitch, and I can do it by myself. We always do a pull test, put the brakes on the trailer and let the truck pull forward a bit to make sure the hitch is hooked up properly; you do this with any hitch. We had motor homes before the fiver and I find it is easier to hook up the trailer than hooking up the tow car to the MH.
Of course that sent me down the youtube rabbit hole to see how this magnet thing works :E How difficult is the TrailerSaver hitch to unhook and how heavy is it to remove from the truck? The Anderson is appealing because of the light weight, hadn't thought about that aspect.
it is real easy to hook up, back into it and make sure you are compressing the bags. To un-hook, pull the arm and lift the trailer so there is no weight on the bags. We have the BigFoot system so it's easy to do. The hitch is heavy, but for us we travel 6-8 months a year, when we aren't RVing the truck is in the garage, so I just leave it in the bed. I do have a chain hoist if I'm by myself or my son and I can remove it if need be. An Air hitch takes a lot of stress off both the trailer, truck and for those of us in the truck. The other thing is they are pricey.
โJun-06-2016 02:27 PM
Mamacast wrote:Traveler II wrote:
There is a learning curve for any hitch. In the past we've had a Reese, moved up to a B&W and three years ago bought our Trailer Saver air hitch. Each was better but we really like the Trailer Saver for the way we RV. We have two sticks with a magnets, we put one on the hitch and one on the pin and it make it easy to like
up, works with any hitch, and I can do it by myself. We always do a pull test, put the brakes on the trailer and let the truck pull forward a bit to make sure the hitch is hooked up properly; you do this with any hitch. We had motor homes before the fiver and I find it is easier to hook up the trailer than hooking up the tow car to the MH.
Of course that sent me down the youtube rabbit hole to see how this magnet thing works :E How difficult is the TrailerSaver hitch to unhook and how heavy is it to remove from the truck? The Anderson is appealing because of the light weight, hadn't thought about that aspect.
โJun-06-2016 01:01 PM
Traveler II wrote:
There is a learning curve for any hitch. In the past we've had a Reese, moved up to a B&W and three years ago bought our Trailer Saver air hitch. Each was better but we really like the Trailer Saver for the way we RV. We have two sticks with a magnets, we put one on the hitch and one on the pin and it make it easy to like up, works with any hitch, and I can do it by myself. We always do a pull test, put the brakes on the trailer and let the truck pull forward a bit to make sure the hitch is hooked up properly; you do this with any hitch. We had motor homes before the fiver and I find it is easier to hook up the trailer than hooking up the tow car to the MH.