Heavy duty 16in tire

[buc1980]

Who make heavy duty tire in size 16 ,load capacity over 3500.

[JIMNLIN]

buc1980 wrote:
The RIB was a 2009 May be 16000 mile on them.I see a small buble on the side about a 50 mile from the destination but with 6 mile left on the trip it blow up.I think at SAILUN G637 now

Wise choice for your heavy trailer with as in your earlier post says 11800 lb on the axles.

Loads on trailers tires constantly change especially in strong side winds traveling down the road.
One tire blog showed loads on tires on the leeward side in a 35 mph side wind, could grow as much as 30 percent higher than the static load.

[Me_Again]

Westlake Tires. Largest chinese tire company.

http://en.wikipedia.org/wiki/Hangzhou_Zhongce_Rubber_Company

[calewjohnson]

Michelle.S wrote:
Not a recommendation as it's still a Chinese "E" (10 ply), but WestLake tires are now showing up as OEM on some heavier units and have a Load capacity just over 3500 so 7K axles don't have to be de-rated.

We have the Westlake tires. They look to be quite beefy, however, I ran the side wall around a curb and seem to have damaged the side wall, a slight bubble has formed. I am replacing all of mine with Sailun tires. The tire shop was surprised about the damage to the Westlake tires. They are popular with the contractors around here.

Cale

[Michelle_S]

Not a recommendation as it's still a Chinese "E" (10 ply), but WestLake tires are now showing up as OEM on some heavier units and have a Load capacity just over 3500 so 7K axles don't have to be de-rated.

[buc1980]

The RIB was a 2009 May be 16000 mile on them.I see a small buble on the side about a 50 mile from the destination but with 6 mile left on the trip it blow up.I think at SAILUN G637 now

[Cummins12V98]

ol Bombero-JC wrote:

Cummins12V98 wrote:
If you want the "best" in a G buy the GY's. Top quality, US Made. They will pay damages. Their track record since 07 has been great.

E tires I would go with Me Again's recommendations.

Track record is *not* great - before or after '07 - research them where heavy trailers "live" - like on the SKPs forums.

GY *does* pay for repairs to damage done to your trailer..:C

Good reputation on that one - as it apparently happens often (especially with Marathons).

Does GY pay for your down time?..:D

EZ - solution:
Look for tires with a rep for *not* causing damage!..:S

~

I was NOT talking about Marathons. I stand by my statement. I have personally ran two sets of GY G's many thousands of miles without even a flat. I went to GY H's in 2012 they have been trouble free also.

[Me_Again]

No tire is foolproof. Even 17.5 LRH tires are known to fail once in a while. If one does not have a TPMS you do not know if it was a run flat problem or sudden failure! Except in the case of hearing a load boom!! Chris

[ol_Bombero-JC]

Cummins12V98 wrote:
If you want the "best" in a G buy the GY's. Top quality, US Made. They will pay damages. Their track record since 07 has been great.

E tires I would go with Me Again's recommendations.

Track record is *not* great - before or after '07 - research them where heavy trailers "live" - like on the SKPs forums.

GY *does* pay for repairs to damage done to your trailer..:C

Good reputation on that one - as it apparently happens often (especially with Marathons).

Does GY pay for your down time?..:D

EZ - solution:
Look for tires with a rep for *not* causing damage!..:S

~

[Cummins12V98]

Me Again wrote:

Cummins12V98 wrote:

Me Again wrote:

Cummins12V98 wrote:
If you want the "best" in a G buy the GY's. Top quality, US Made. They will pay damages. Their track record since 07 has been great.

E tires I would go with Me Again's recommendations.

Say what? The tires I listed above are all Load Range G tires, rated to 3750 each.

Chris

I know I should have been more clear. I should have said "if buying E tires I would go with Me Again's recommendations" better? :B

He asked for a tire with over 3500 lbs capacity in 16", therefore there is no heavy duty(which he also asked for) E rated tire available. Chris

In know. It was a general statement.

[Me_Again]

Cummins12V98 wrote:

Me Again wrote:

Cummins12V98 wrote:
If you want the "best" in a G buy the GY's. Top quality, US Made. They will pay damages. Their track record since 07 has been great.

E tires I would go with Me Again's recommendations.

Say what? The tires I listed above are all Load Range G tires, rated to 3750 each.

Chris

I know I should have been more clear. I should have said "if buying E tires I would go with Me Again's recommendations" better? :B

He asked for a tire with over 3500 lbs capacity in 16", therefore there is no heavy duty(which he also asked for) E rated tire available. Chris

[Cummins12V98]

buc1980 wrote:
I use to have g614 tire befor but I give up of them when 3 of them blow up.That was back in 2005-2007.I replace them with Michelin RIB but this week one of them blow up so I want to replace with stronger tire.I like to get the 17.5 rims but I replacethe original rims (steel) with Alcoa.If anybody know a cheep place to buy aluminum rim tell me.

Are you saying you went from a G to an E tire on the same RV? Or did the RV originally come with E's?

[Cummins12V98]

Me Again wrote:

Cummins12V98 wrote:
If you want the "best" in a G buy the GY's. Top quality, US Made. They will pay damages. Their track record since 07 has been great.

E tires I would go with Me Again's recommendations.

Say what? The tires I listed above are all Load Range G tires, rated to 3750 each.

Chris

I know I should have been more clear. I should have said "if buying E tires I would go with Me Again's recommendations" better? :B

[Cummins12V98]

buc1980 wrote:
I use to have g614 tire befor but I give up of them when 3 of them blow up.That was back in 2005-2007.I replace them with Michelin RIB but this week one of them blow up so I want to replace with stronger tire.I like to get the 17.5 rims but I replacethe original rims (steel) with Alcoa.If anybody know a cheep place to buy aluminum rim tell me.

I went from the factory 16 GY G's on our MS after 5 years and zero problems to GY H's and 17.5" Alcoa wheels from trailertiresandwheels.com. they were shipped to me mounted and properly balanced. Call Scott he is great to deal with.

Sold the tires, wheels and spare for $1,000 on CL.

[Me_Again]

buc1980 wrote:
I use to have g614 tire befor but I give up of them when 3 of them blow up.That was back in 2005-2007.I replace them with Michelin RIB but this week one of them blow up so I want to replace with stronger tire.I like to get the 17.5 rims but I replacethe original rims (steel) with Alcoa.If anybody know a cheep place to buy aluminum rim tell me.

So tell us more about the Rib that failed. How old and how many miles? Do you have a TPMS? Was is a run flat failure or a sudden failure? Inquiring minds want to know! Chris