Hitch cover for Trailersaver BD5

[Wood_chip]

There probably wont be much response to this post being that the BD5 is used by very few people but has anybody found a good source for a cover for the BD5 ? I had a cover shipped from trailersaver but they were basically a B-cue cover. I sent it back

[Darryl_Rita]

Custom made, courtesy of the local boat upholstery shop.

[rhagfo]

Wood chip wrote:
The rails of the bed cover would not clear my Aux fuel tank so just looking for the hitch cover. Thx.

Could you post a picture of the aux fuel tank? Is it taller than the bed rails? We have a roll up bed cover that the frame sits on top of the bed rails. works great for keeping the bed dry.
I have also seen one where a section on the front flips back for easy access to your aux fuel tank.

[Jim-Linda]

I have a Binkley on the FL60. I measured necessary dimensions and went to lowe's , got a plastic tub and mounted it over hitch. I did put two holddown's on it and easy on/off.

[JTrac]

A cheap fix might be a boat motor cover. I have the BD3 and a BakFlip Revolver X2 cover that keeps mine dry. I also have a bass boat with a 200 Mercury and bought a Bass Pro cover for it for less than 50 bucks. It has a strap at the bottom to cinch it tight. If you want I can see how it fits over my BD3, just not tonight.

[greende]

Go to a place that makes boat canvases. They can make one for it out of durable vinyl fabric.

[Wood_chip]

The rails of the bed cover would not clear my Aux fuel tank so just looking for the hitch cover. Thx.

[rhagfo]

X2

As long as the hitch isn't above the bed rails, any good bed cover will work and keep the rest of the bed dry also.

[2naEagle]

Just so you know that your not alone, I'm one of the very few. I absolutely love the hitch.
I use this to cover my hitch:B