cancel
Showing results for 
Search instead for 
Did you mean: 

Stryker 3414 Slide Problem

Rough2000
Explorer
Explorer
I am camping with a friend that has a 2021 Stryker 3414 toy hauler. He is having a problem with his Kitchen Schwintek Slide. Anyone know where they may have put the Controller Box for this model? Other than trying to resync the slide controller, any other suggestions on why the slide may not want to go out.
If it moves but shouldn't, use Duct Tape. If it doesn't move but should, use WD40.
1 REPLY 1

joebedford
Nomad II
Nomad II
The two failures I had on my 3 Schwinteck slides: motor failure; incorrectly installed motor tore cable.

Fixed them both myself, but it was very difficult getting at the motors because there was no access slot cut in the frame in the early models.

I don't know where the slide controller is on your model. In fact, I only remember where one (of the three) controllers is in MY RV.