cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Technical question for a 5th wheel hitch

Ryanjb01
Explorer
Explorer
Hello everyone,

Looking for input and advice here:

Current set up:
2018 GMC with factory inbed puck system
Pullrite 20k(non-slider) hitch with the adaptor bracket to utilize the factory puck system
Trail Air pin-box on the trailer

My over height of the trailer is 13'5.5"

The hitch is adjusted as low as it can go and the pin box is adjusted as high as it can go. I have nowhere else to adjust to lower my overall height.

I am curious to those of you that have used, or are currently using the factory puck system for your 5th wheel. I am looking for a hitch that does not require the adaptor bracket(this will lower the trailer about 3").

What do you use and how do you like it?

I really like my Pullrite hitch, but the recent addition of the trail air pin box has increased the overall height of my trailer. It is noticeably "nose-up" with the current set up.

Thanks for the information,

Ryan
2018 GMC 3500 Denali Crew Cab Dually Duramax/Allison ๐Ÿ™‚
2015 Cedar Creek Silverback 35QB4
Ryan, Marsha, Alyssa and Emily

"Opportunity is missed by most people because it is dressed in overalls and looks like work" ~ Thomas Edison
6 REPLIES 6

Cummins12V98
Explorer III
Explorer III
You already have the TrailAir pin box. Simply get a B&W puck and be happy!!!
2015 RAM LongHorn 3500 Dually CrewCab 4X4 CUMMINS/AISIN RearAir 385HP/865TQ 4:10's
37,800# GCVWR "Towing Beast"

"HeavyWeight" B&W RVK3600

2016 MobileSuites 39TKSB3 highly "Elited" In the stable

2007.5 Mobile Suites 36 SB3 29,000# Combined SOLD

Durb
Explorer
Explorer
Your best solution in terms of quality of tow would be to go back to your stock pin box and get a Trailer Saver BD5 which would mount in your pucks. Sell the TrailAir pin box and your current hitch to offset the high cost.

lovetotow
Explorer
Explorer
We purchased the reese that ford sold for our new puck system, the hitch is the same height as our pullright, it is the new truck that is eight inches taller. To right level i had to raise the pin box, i run at 12.5ft and looks good, good luck
Dale & Lynda
2018 ford F250 4x4
2011 cruiser 32bl 5th wheel

MFL
Nomad II
Nomad II
B&W makes a great hitch to fit right in your GM puck system. Take a look at e-trailer for price and review.

Jerry

fulltime5er
Explorer
Explorer
I like the B&W Companion that I have. They have models specifically designed for the puck systems in the Big 3. Great hitch, easy to remove when needed.
2013 Ford F350 Crew Cab, 4x4 Long bed, DRW, 6.7 Diesel, 3.73,
2014 Cedar Creek 36ckts
B&W Companion hitch (puck type)

agesilaus
Explorer III
Explorer III
We have the Pullrite (in my tagline) but it has no bracket for the Ford puck system. It just sits flat on the bed of the truck. I haven't measured the height of my fiver as closely as you have but generally would avoid any overpass less than 14 ft. The Titanium is an odd fiver so I'm not sure how it corresponds to most others.
Arctic Fox 25Y Travel Trailer
2018 RAM 2500 6.7L 4WD shortbed
Straightline dual cam hitch
400W Solar with Victron controller
Superbumper