Upgrading suspension on Jayco Designer

[Rough2000]

I have a 2009 Jayco Designer 34RLQS. I want to upgrade the suspension from the original nylon bushings and bolts to metal bushings and wet bolts. ( I know, should have done this long ago). What do I need to order, and where is the best place to order these from? As always, thanks for your help.

[TCollins]

I did this on my 2003 Jayco Designer. When I bought the unit(used) the previous owner supplied all the original documentation. One of the manuals was from Dexter so I ordered all the parts from them. They are quite helpful on the phone. Price for parts was reasonable. I had a new set of springs built by Eaton Detroit and installed new shocks. The trailer pulls and rides very well now.

TomC

[alexleblanc]

Memphisdoug wrote:

Rough2000 wrote:
With my replacement knees, I'm trying to keep from climbing under my trailer.

Based on that information you might really think about having this job done for you. Replacing your suspension bolts is a job that entails a lot of sitting on the ground, pushing, tugging, laying on your back under the trailer, etc., etc. I did one side of mine each day and my bad knees were plenty sore each day. Just some food for thought.

I 100% agree with this, I had a wet bolt kit installed on mine along with some other stuff and its pretty heavy duty work IMO.

[ol_Bombero-JC]

Rough2000 wrote:

stickdog wrote:
Jayco does.

I know Jayco does...I was trying to speed up the process with all the knowledge on this site

Chances of you getting bad info from an internet site - (with lots of well meaning, informed? folks) -vs- the mfgr.......would be worth at least a comparison *test*.

And *if* you were having it done by a shop - better *they* error and order the wrong kit than you!

You will lose time either way - but not *your* job to get the correct parts for the job...:W

~

[laknox]

Personally, we deal with a good, local, trailer shop, and they quoted me a very fair price for the job, including the correct kit. I still have good knees, but my DIY projects usually end up costing a =lot= more than if I'd had someone do it right from the get-go. I ended up not doing it, as I put my FW up for sale shortly after.

Lyle

[Rough2000]

stickdog wrote:
Jayco does.

I know Jayco does...I was trying to speed up the process with all the knowledge on this site

[ford_truck_guy]

On my prior fifth wheel I changed to the MorRyde HD Shackles and Wet Bolt kit myself..

I would say that If I had bad knees , I would have never been able to do that job myself... let someone do it for you... Some things just are not worth trying

[Rough2000]

I'm planning on having someone do it for me. I wanted to order the kit and have it ready for them.

[NHIrish]

Having replaced my entire Carriage suspension after a breakdown, it isn't hard...unless you have bad knees. I suggest you have someone do it.

[fj12ryder]

Yeah, it's not a job for someone with bad knees.

[Memphisdoug]

Rough2000 wrote:
With my replacement knees, I'm trying to keep from climbing under my trailer.

Based on that information you might really think about having this job done for you. Replacing your suspension bolts is a job that entails a lot of sitting on the ground, pushing, tugging, laying on your back under the trailer, etc., etc. I did one side of mine each day and my bad knees were plenty sore each day. Just some food for thought.

[stickdog]

Jayco does.

[Rough2000]

Thanks for the replies. Does anyone know who made the axles and suspension on the 2009 Designer, and what size axles were used on the 34RLQS? With my replacement knees, I'm trying to keep from climbing under my trailer.

[broark01]

Ordered my MOR/ryde LRE12001 Tandem Wet Bolt Kit from Amazon.com.

[fj12ryder]

I ordered mine directly from Dexter, cheapest price I could find at the time.

Double check to make sure you haven't had bolts spinning in the hangers, or such like that.