I had this same issue on my Sunseeker 3 years ago, and ended up having to replace all 5 clearance lights. I went with some small LED fixtures. An issue with any replacement lights is going to be the mounting holes are going to most likely be a different dimension center-to-center than the Glo-Brite lights, which in my case were screwed directly into the front cap. I know what I bought were way off. I had to fab up stand offs out of a plastic composite board, screwing those to the original holes and the new lights to the stand offs. I cut a good size hole in the middle, to make room for the wiring butt connectors too, as the original lights were wired directly. It was an all Saturday project.
Rob
Too Many Toys.
- '11 E450 Sunseeker 2300
- '16 F150 Supercrew 5.0/FX4
- '09 C6 Z51
- '15 VW Golf Sportwagen daily driver
- '86 Civic and '87 CRX race cars