dons2346: I found the control panel, rightwhere you said it would be. I,ve checked the fuse and voltage to the travel pin. It is good. now it says "check for power at the manifolds." now I need to know the location of the manifolds. The Dynomax chassis manual does not show the location, only the diagram. I,ve looked in the panel under the drivers side. I,m doing this along with a few other things, so it,s taking me a while. I was going to take one of my grandsons on a short trip before going to colorado, but this leveling problem has to be solved first. Thanks to everyone for their replys.