Aug-12-2017 12:58 PM
Aug-13-2017 03:05 PM
tobydad wrote:
Did you check the battery dis-connect switch. this must be switched on in order to get 12 volt anywhere in the unit. Switch may be inside the door on the wall or check your manual for location.
Aug-13-2017 03:03 PM
Aug-13-2017 03:00 PM
Aug-13-2017 10:03 AM
dmjenks52 wrote:
Thanks for the reply, Old-Bisquit.
I understand I have to have 12V going to it - that's why I tested the wiring going to the board. I removed every fuse I had on the rig and tested continuity with a meter. My panel is not labelled clearly, so I don't know what wires go where. Oddly I have two lights that have no power either, so I suspect a bad connection, but don't know where to look. At least in my house I can trace circuits from the breaker box - frustrating!
Considering getting a new board.
Aug-13-2017 09:01 AM
Aug-12-2017 11:22 PM
Aug-12-2017 09:10 PM
Aug-12-2017 08:39 PM
Aug-12-2017 03:06 PM