VMSpc for ISB 6.7 Issue

[J_Walker]

I have a new MH with an ISB 6.7 engine. I set up VMSpc right away and began getting spurious codes as well as some valid ones. The valid ones were the harmless type such as low air pressure when the engine was off. I worked with Silver Leaf and they modified their software and the spurious codes stopped. My engine was manufactured in 2013 or late 2012. My Check Engine light never came on and the Freightliner dash display showed no stored codes. Does anyone else have this problem with VMSpc. BTW Silver Leaf reps were most helpful in correcting this issue. I am just wondering if I have some unique issue with my engine.

[J_Walker]

I use the USB connection.

[Teacher_s_Pet]

I purchased the VMspc for use on our 2006 350Cat powered Phaeton at an FMCA rally in late Sept. This is our 1st "trip" with it. I like the info, but ours has been dropping the connection to the Wifi interface. Is yours Wifi or hardwired? Until I called SL it was dropping every 2-3 minutes and not re-starting. After talking to them and asked to collect data via the communications raw data tool, it is now running for 15-20 minutes with the log running and still not re-starting automatically. I haven't sent the data yet to SL, but plan to now that we're parked for a week, so I'm looking forward to their answer.