โJun-04-2009 08:19 AM
โJul-16-2009 10:55 AM
โJul-16-2009 10:53 AM
โJul-16-2009 10:41 AM
โJul-16-2009 09:28 AM
โJul-16-2009 08:34 AM
The Beave wrote:
This month I rebuilt the slid out battery box. The portion where the 4 - 6 volt batteries sat had been made of 3/4" plywood and had totally rotted out. The plywood was replace with a panel cut from a 1/2" thick poly cutting board. I also isolated the + battery cable to the rig, wrapped it with wire cable wrap and suspended it with shock cord so it could not be pinched when the battery box was slid in. Also had a leaking propane tank regulator replaced.
Today I also changed the rear Differential gear oil (14 Q), spilled almost as much. That 140 weight is hard to pump. Also checked the engine coolant to see if it needed the additive. It was ideal. I also relocated the bedroom thermostat for better access.
โJul-16-2009 08:31 AM
โJul-16-2009 08:14 AM
โJun-29-2009 12:17 PM
โJun-29-2009 11:24 AM
โJun-29-2009 11:20 AM
โJun-29-2009 07:47 AM
โJun-29-2009 06:01 AM
โJun-28-2009 09:56 PM
โJun-28-2009 09:38 PM
โJun-28-2009 08:13 PM