cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

DVD Player

jplante4
Explorer II
Explorer II
Replaced the old VCR with a DVD player. Before I start, I have to say that I never tried the VCR with the new TV setup.

I have a video switch box that switches the TV input source from antenna to cable. There's a third position labeled VCR and the VCR IN tap on the back got the RCA output from the DVD player through a RCA-coax adapter.

I thought it would be a simple thing; switch the box output to VCR and tune the TV to channel 3 and get DVD on the TV, but NO.

So to verify that the DVD was working through the RCA output, I brought it into the house and tries it with my kitchen TV and no pix there either.

Is it the RCA output on the DVD player or am I missing something on the newer TVs that needs to be done to get NTSC from a player?
Jerry & Jeanne
1996 Safari Sahara 3530 - 'White Tiger'
CAT 3126/Allison 6 speed/Magnum Chassis
2014 Equinox AWD / Blue Ox
5 REPLIES 5

MrWizard
Moderator
Moderator
i have DVD not blu ray
i have been browsing blu ray watching the advs, but the good ones are still close to $100 or more

i don't want a $39 refurb with a 30day warranty

if i buy blu ray it will be NEW with warranty and 3d output
3d TV can wait until I find one for the right price
but no sense in buying the player twice
I can explain it to you.
But I Can Not understand it for you !

....

Connected using T-Mobile Home internet and Visible Phone service
1997 F53 Bounder 36s

8_1_Van
Explorer
Explorer
I can't see using a DVD player with a HD TV when blu-ray HD/DVD combo players are so cheap today.

jplante4
Explorer II
Explorer II
Yeah, I figure because the output is labelled "coax" it would be going through a converter.



But now that I see the jacks in the light, I see this is only audio.
Jerry & Jeanne
1996 Safari Sahara 3530 - 'White Tiger'
CAT 3126/Allison 6 speed/Magnum Chassis
2014 Equinox AWD / Blue Ox

MrWizard
Moderator
Moderator
dvd player does not output RF, no RF modulator circuit
NO ch 2-3 output

the RCA connectors are A/V audio video "composite video"

you have to connect to A/V input on the TV

the Co-AX switch box cannot be used

you will use the input control on the tv to select antenna or A/V
use A/V for the DVD player

New TV ?

just run an HDMI cable from the DVD player to the TV
just like the stick & Brick TV setput
I can explain it to you.
But I Can Not understand it for you !

....

Connected using T-Mobile Home internet and Visible Phone service
1997 F53 Bounder 36s

1492
Moderator
Moderator
Is the DVD RCA video output to TV RCA input connector both yellow?

If you're using the coax input on the TV instead, from the DVD's RCA outputs(yellow-video, red/white-audio), you'll need an RF Modulator converter box to connect to your TV.