Suburban Water Heater AC power is a simple circuit
*120V AC from Main AC Power Panel circuit breaker (turn off then back on to make sure it wasn't tripped)
*120V AC Power goes to AC Junction Box on right side of WH Tank (looking from inside RV at backside of WH. (Wires connected with wire nuts....check that they are actually connected/tight)
*120V AC then goes to the ON/OFF switch (in outside compartment...lower left corner)
*120V AC from switch to the AC set of t-stats....black wire to top t-stat (Hi temp...manual reset/trips at 170*F)
*Then down the fused metal wire to bottom t-stat. Normal temp t-stat/Opens at 130*F (check that the fuse wire is intact)
*120VAC then goes to the electric element (black wire) and then returns to AC Power Panel (Neutral/white wire)
Green wire to secure/clean grounding screw connection
Suspects...
AC Junction Box wire nuts
Fused wire between Hi and Normal t-stats
Is it time for your medication or mine?
2007 DODGE 3500 QC SRW 5.9L CTD In-Bed 'quiet gen'
2007 HitchHiker II 32.5 UKTG 2000W Xantex Inverter
US NAVY------USS Decatur DDG31