No lights on panel......no 12V DC power
Check for 12V DC at terminal block where DC wires connect (next to control module in outside compartment)
Then follow wires to burner stack and check for DC power coming out of thermodisc.
No DC power....thermodisc has tripped (Opened) which means cooling unit may have leaked/overheated.
If you have DC power then need to check DC power on control module and 3A fuse on board
Is it time for your medication or mine?
2007 DODGE 3500 QC SRW 5.9L CTD In-Bed 'quiet gen'
2007 HitchHiker II 32.5 UKTG 2000W Xantex Inverter
US NAVY------USS Decatur DDG31