Hi all I had posted last week thinking my level control switch might need replacing due to the pump running when I start the motorhome and then stopping when I selected the off button (but then running again when I would release the off button). I went to open up the slide outs and same thing. The pump will open the slides no problem but then continue to run continuously for a couple of minutes. In a non-technical way (if possible) can you help me troubleshoot this? Thanks so much. Trish
Tricia and Tom
:B
2005 Mandalay 40E 400HP cummins/Freightliner in Sapphire blue.
I would start with a pump reservoir fluid level check.
Jan and Rocky Volunteers for USFWS. 29 refuges with 9300 hrs ea since 2006. 2004 Allegro 30DA, Workhorse 8.1, Banks, 2012 Jeep Liberty Jet, Blue Ox Aladdin, Brake Buddy Advantage Select, 300 watts solar, 5 Optima group 31 AGM's, 2000watt Ames PSW inverter.