โJul-15-2020 02:28 PM
โJul-15-2020 08:29 PM
โJul-15-2020 07:11 PM
โJul-15-2020 06:56 PM
fj12ryder wrote:
Probably have to bite the bullet and get a 3/4" NPT tap and clean up the threads. That's what I did. I tried the "cut slots in a pipe" and a couple other things, but the tap is about the only thing you can depend on to do the trick.
โJul-15-2020 05:40 PM
โJul-15-2020 04:12 PM
โJul-15-2020 02:36 PM
โJul-15-2020 02:33 PM