Need help with removing taillights.

[Winged_One]

2011 Coachmen Brookstone

How do I access the bulbs and wiring on these taillights? (see pic)

Do they pop out toward you?

Accessing from underneath/behind looks impossible as it is completely sealed by being boxed in and sealed shut by the trailer.

They are Wesbar lights. They are NOT LED lights.

[B_O__Plenty]

I just push mine in on one side. They will swivel inward and you can the pull out the rubber and the light. Mine were sealed units with no replaceable bulbs. I replaced all four with LED lights from Harbor Freight. Very happy with them. Cheap price too.

B.O.

[othertonka]

To put them back, spray with soap and water, makes them slip back in place

[wa8yxm]

On mine I press anywhere along the edge, they "pivot" usually 90 degrees from where I push, then I pull them out.. Getting them back in takes a bit of observation and control.

Mine were not LED. are now.

[Winged_One]

Got it!

Thanks!

[OpenRangePullen]

Take a flat screwdriver and sick it between the light and the rubber seal and they should just pop out. Clicky