โJun-23-2015 04:28 PM
โJul-19-2015 10:36 AM
JiminDenver wrote:These I'm referring to are the standard ol' PVC pipe cutters, and since they open enough for 1" PVC, a small diameter piece of 4/0 is nothing, and a far easier squeeze. I saw the one at HF but couldnt bring myself to buy it after trying the PVC shear myself.
I saw some of the ratcheting shears at HD before going to HF. They wanted three times as much but they may be helpful if you have smaller or weak hands. ---snip---
โJul-19-2015 09:18 AM
โJul-19-2015 08:48 AM
โJul-19-2015 06:42 AM
โJul-19-2015 02:37 AM
MrWizard wrote:This sounds silly, but a friend of mine rewired his batteries and inverter with 4/0 Super Excelene and my crimper. He said he used a garden variety PVC ratcheting cutter.. Really? That must be ugly...?
Got a new harbor freight just up the street, next time I stop in, I'll look for that cable cutter
โJul-18-2015 11:51 PM
โJul-18-2015 08:54 PM
โJul-18-2015 08:07 PM
โJul-18-2015 08:00 PM
โJul-18-2015 06:32 PM
โJun-30-2015 08:50 PM
โJun-30-2015 06:43 PM
โJun-30-2015 05:27 PM
JiminDenver wrote:
I picked up the HF 10" cable cutters today. They were on sale for a bit under $6. As I paid for them the cashier told me that they have a lifetime warranty so just bring them back if any thing goes wrong. They will replace them, no receipt needed.
They went thru the 1/0 with very little effort and a nice clean cut too. I'm thrilled and if they dull, I'll trade them in. ๐
โJun-30-2015 05:19 PM