Big foot 2000

[Gaetan]

My brothe just bought a 2000 bigfoot 30 series
It seems that their is more weight on the paseenger side and when driving it look like if all the weight is on the same side.
The camper has slided more to the right hand side, this could be partt of the problem
how do you maintain the camper centered
Gaetan

[HMS_Beagle]

[2lazy4U]

^^^^ This is the easy quick fix.

[RoyB]

I would slide some equal size wood pieces on both sides of the camper to fill in void area (2X6's or whatever fits) like KOHLDAD says...

[kohldad]

Even with a bed mat, my father had problems with his 3000 sliding around. We figured it was because of the ultra smooth fiberglass bottom.

He built a 2x6 frame that starts at the back side of the fender wells and goes to the front. The front has a cross bar to keep them spaced. Then he has two pieces which go from the side pieces to the 2x notches built into the side of the bed. This setup only allows about 3/8" clearance on the side of the camper.

We are sure it still moves, but not enough to be noticed.

With the 3000 series, unless you have a full black tank, it will be heavy on the passenger side because of the equipment distribution. He solved that issue by adding air bags and running about 5psi more on the passenger bag.