Cool Mods - Thread restored 10/18/2012

[2Rad4U]

My daughter was getting a little warm in her bunk during our last camping trip, so I decided to put her a fan in to keep the air flowing.

I had been wanting to add a 12-volt fan to the main living area anyway, so I decided to tackle both jobs today. A trip to Wal-Mart for two fans($8.48 each) and we're halfway there.

She picked the spot, and I got to work -



I picked up the power from her overhead light. All I have left is to install a short piece of wire cover and I'm done -



I added one in the main area -



I dropped by Lowe's and found this cool soap dispenser. I also just installed these Pop-a-Toothbrush holders -



I added a sopa dispenser to the kitchen area as well. I also installed a Pop-a-Napkin under the radio -



Here's an easy mod. I found this over the door towel rack at Walmart and it works great -

[stugpanzer]

Here's one of mine. I made a rack to put my generator on the TT bumper. Here's the complete details: http://www.rvpics.com/forums/showthread.php?t=392

[Stewart_H]

No problem guys.

Stewart

[rem700]

Stewart_H wrote:

jailnurse911 wrote:
I can not see Idaho camper photos's. I can see all the others so don't know why I can't see his. Anyone know the answer?

Thank you.

Probably because the website he's hosted his pictures on doesn't allow hot linking.

Just right click on the big empty box where his picture should be and copy the web address listed in the property's location. Put that address in the address bar of your preferred browser (Internet Explorer, AOL, Mozilla/Firefox etc) and you can go directly to his picture.

Stewart

THanks for the info Stewart And thanks everyone for the mods. I saved a few of them for my tt. Bump!

[Living_The_Drea]

Never mind. Figured out how to post pics.:)

[Dancing_Bear]

I like that garage floor!

[Just_Horsing_Ar]

I like the door sign - very cool! We also used an idea from this posting, and that was those multi-drawer plastic things to put into our closet space to store clothing in. We bought one that fit and had 2 large drawers on the bottom and two small drawers on the top to my DW and I both get one of each for weekend clothing.

[MarionMedic]

idahocamper wrote:


Tank-risers to allow room for saddle chains, ABS cover actually fits better now as it can rest on top of the tanks..

Thanks for allowing to share some of my mods...Greg

Those are some pretty little "RED X's" you got there.

I hope to do that someday myself. LOL

[jailnurse911]

Thanks Stewart. That worked just fine. I learned something from you......again......THANK YOU!!!!

[Stewart_H]

jailnurse911 wrote:
I can not see Idaho camper photos's. I can see all the others so don't know why I can't see his. Anyone know the answer?

Thank you.

Probably because the website he's hosted his pictures on doesn't allow hot linking.

Just right click on the big empty box where his picture should be and copy the web address listed in the property's location. Put that address in the address bar of your preferred browser (Internet Explorer, AOL, Mozilla/Firefox etc) and you can go directly to his picture.

Stewart

[Pat___Karen]

Living The Dream wrote:
Easy Hot Water Heater Drain.

Parts List:
1/2" x 1 1/2" Pipe Nipple
1/2" to 3/8" x 12" Hose Connector
1/4 Turn Ball Valve

Got tired of removing the plastic plug to drain the hot water heater and this tucks away nicely.

Let me know if you would like to see pics.

Would love to see some pics of the mod. I too do not like the plastic drain plug for the water heater. Thanks, Pat

[2Rad4U]

Living The Dream: Show us those pictures!

[jailnurse911]

I can not see Idaho camper photos's. I can see all the others so don't know why I can't see his. Anyone know the answer?
Thank you.

Very much enjoy this thread.

[mobil1racing]

Living The Dream wrote:
Easy Hot Water Heater Drain.

Parts List:
1/2" x 1 1/2" Pipe Nipple
1/2" to 3/8" x 12" Hose Connector
1/4 Turn Ball Valve

Got tired of removing the plastic plug to drain the hot water heater and this tucks away nicely.

Let me know if you would like to see pics.

If its not a problem, we would like to see what you've done.

[Living_The_Drea]

Easy Hot Water Heater Drain.

Parts List:
1/2" x 1 1/2" Pipe Nipple
1/2" to 3/8" x 12" Hose Connector
1/4 Turn Ball Valve

Got tired of removing the plastic plug to drain the hot water heater and this tucks away nicely.

Let me know if you would like to see pics.

Here is the link to pics of my mod

http://outdoors.webshots.com/photo/2537479440101890400wpPMeX?vhost=outdoors

[stugpanzer]

I love looking at peoples mods! Such great ideas. Thanks all for such great and cool ideas!