cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Cool Mods - Thread restored 10/18/2012

2Rad4U
Explorer II
Explorer II
My daughter was getting a little warm in her bunk during our last camping trip, so I decided to put her a fan in to keep the air flowing.

I had been wanting to add a 12-volt fan to the main living area anyway, so I decided to tackle both jobs today. A trip to Wal-Mart for two fans($8.48 each) and we're halfway there.

She picked the spot, and I got to work -



I picked up the power from her overhead light. All I have left is to install a short piece of wire cover and I'm done -



I added one in the main area -



I dropped by Lowe's and found this cool soap dispenser. I also just installed these Pop-a-Toothbrush holders -



I added a sopa dispenser to the kitchen area as well. I also installed a Pop-a-Napkin under the radio -



Here's an easy mod. I found this over the door towel rack at Walmart and it works great -

Chris
2005 Rockwood 2516G (sold)
2005 Max-Lite 24RS (sold)
2019 Rockwood 2608BS (sold)
2020 Grand Design 337RLS
2018 Chevy 2500HD
2,727 REPLIES 2,727

PennyPA
Explorer
Explorer
And how do you make the bed with the cabinets on either side? We have that and it drives me NUTZ~!~
COPD and LVRS
On the Road Again

My Home - 2002 Glendale Titanium, 32/37DS with a basement slide.
Our Home's Leader - Dodge Ram 3500 Cummins Turbo Diesel Dually

Our Leaders - Sam(Bird), Chirp(Bird), Nellie(FAT cat), Lucy(Kitten), Willie(Dog) & Daisy(Dog)

larry_kruzan
Explorer
Explorer
technoholic wrote:
We bought our TT used. The original booth style dinette had been removed and replaced by one that was cobbled together with 2x4s and plywood. It had to go. After removal, the



That flat panel mount is cool - what brand or modle is it?

Larry
Larry and Debbie Kruzan

We never turn a corner without wondering in amazement at God's creation!

PamfromVA
Explorer
Explorer
We have not had to do much to this new camper just a couple of things to make it home. I collect magnets from our travels and since we now have all the windows, I have lost wall space. I found these magnet boards online that are 3 inches wide and screwed them into the wall on each side of the slide:




added a bedroom TV and sat. box. didn't want to hang anything off the walls that I would have to take down for travel. we don't plan on using it when "camping" but it is nice for the road trips.



close up of the mount:


folded up for travel:



hung fan for the bedroom:

2016 Grand Design Reflection 303RLS
2017 Dodge Ram 3500
One DH
two very spoiled camping dogs

larry_kruzan
Explorer
Explorer
technoholic wrote:
We bought our TT used. The original booth style dinette had been removed and replaced by one that was cobbled together with 2x4s and plywood. It had to go. After removal, the walls and floor where pretty beat up. The walls were patched and new vinyl wallpaper applied to the bottom half. The floor was patched and a carpet remnant installed. Lastly, a new dinette table and chairs were brought in. We like the way it turned out and it was actually less expensive than buying a replacement RV dinette booth.


One of the best decisions we made when ordering our TT was to reject the booth. I can see it with kids, but us older folk like a little more "spread"

Larry
Larry and Debbie Kruzan

We never turn a corner without wondering in amazement at God's creation!

technoholic
Explorer
Explorer
We bought our TT used. The original booth style dinette had been removed and replaced by one that was cobbled together with 2x4s and plywood. It had to go. After removal, the walls and floor where pretty beat up. The walls were patched and new vinyl wallpaper applied to the bottom half. The floor was patched and a carpet remnant installed. Lastly, a new dinette table and chairs were brought in. We like the way it turned out and it was actually less expensive than buying a replacement RV dinette booth.

Campin3
Explorer
Explorer
Put up a basic, but very useful paper towel holder under the cabinet and a Camco stove cover.

Put wire bins in one of the pantry cabinets (DH will be putting shelves in the other one.

In the bathroom, we put up hooks for towels, a new shower curtain, 2 hooks in the shower to hang things or dry things (will be putting in a tension shower rod at some point to dry wet suits, etc...), put small wire bins in the medicine cabinet to separate things and help keep them from falling over as easily (took out most things for the winter) and one of my favorites, a wall mounted soap dispenser.



We did some organizing in the outside pass through storage too
Jill & Josh
DS 2008
2 Golden Retrievers (Sambuca 10yrs and Wrigley 11mos)
2007 Starcraft TravelStar XLT 27BH (triple bunk)
Pulled by a Chevy 1500 pickup
Had: 2001 Coachmen Cadet Hybrid
2002 Flagstaff 176LTD Pop Up
1994 Sunline Solaris 17ft

Campin3
Explorer
Explorer
We just got our TT last weekend. So far we have done a few small mods such as key hooks by the door, etc...

*seeing if this works, if so will post more ๐Ÿ™‚
Jill & Josh
DS 2008
2 Golden Retrievers (Sambuca 10yrs and Wrigley 11mos)
2007 Starcraft TravelStar XLT 27BH (triple bunk)
Pulled by a Chevy 1500 pickup
Had: 2001 Coachmen Cadet Hybrid
2002 Flagstaff 176LTD Pop Up
1994 Sunline Solaris 17ft

Hnda_CR
Explorer
Explorer
subscribing
Jason, Ashley, Blake, Brayden, Ella and Meah the Black Lab
'04 F-250 Crewcab 6.0L 4x4
'07 Sunnybrook Brookside 298FWBHS

jdmorris76
Explorer
Explorer
Our headboard make a turn with the front wall, or should I say two angles. I took both pcs off and covered them sepratly and then screwed them back on with sheetrock screws. I'll see if I can find some pictures.
2006 F-150 4x4
2006 Smokey 30SBH LE

KLO
Explorer
Explorer
Pad the wall with quilt batting and a pretty fabric. Looks better and more insulation! I haven't done this but think it would work very well.

BamaGram01
Explorer
Explorer
haha, thanks. Our bedroom has a headboard behind it that I recovered too but because the wall behind it goes up then it starts going at an angle I couldnt do much of a headboard on it. So now I am wondering what I can do behind that bed. The walls are ugly and I want to make it look nice but I just cant think of what to put on the wall

Big_Dogs_Daddy
Explorer
Explorer
I can't believe I read the whole thing!!!


Now I have a giant list of things to do.
'99Suburbon 454, 4/11, air bag suspension,K&N filter (7MPG)
'09 Denali 31FG
'47DH
'??DW
Married 44 yrs
DW still only 34?:W
2 BIG dogs Tank,Misty Moo. All Great Pyrenees
2 Cats Thumper,Patches
1 Daemon in a cat suit KC
Moose - Gone to the rainbow bridge

leslienw
Explorer
Explorer
BamaGram01 wrote:
Headboards I made by getting a sheet of insulation and covering with batting and fabric. I also monogrammed some pillow shams to make the bunks look pretty since they are visable at all times. I also sewed some fabric and velcroed it to the side and bottoms of the bunks to cover the ugliness


WOW! It looks like a B&B in there - that's awesome! Great work.
Leslie and Clarence
2005 Jayco Jay Flight 29BHS towed by a 2000 Chevy Silverado LT 1500 Z71
:B

BamaGram01
Explorer
Explorer
Headboards I made by getting a sheet of insulation and covering with batting and fabric. I also monogrammed some pillow shams to make the bunks look pretty since they are visable at all times. I also sewed some fabric and velcroed it to the side and bottoms of the bunks to cover the ugliness

















mach8274
Explorer
Explorer
Poppy & Nana wrote:
mach8274 wrote:
Poppy & Nana wrote:
Mach8274.................

mach8274 wrote:
Flag pole




can the flag spin all the way around without hiting the front of the trailer..... and how did you mount it to the tongue???


No, the flag does not spin. It is stationary. It is mounted with custom brackets I made out of aluminum angle and u-bolts. The u-bolts mount the whole thing to the tube on my electric tongue jack.


Can you give more details on the bracket???? Photos??? We have one that we need to put a steak in the ground and it spins 360 degrees but this looks very neat!


I don't have any close ups of the brackets yet. We are going on a trip with it next weekend and I can take pics and post them then. Basically, 2 2 inch u-bolts mount the brackets to the tongue jack tube and 1 1/2 inch u-bolts mount the flag pole to the brackets. Then I used a pvc coupler to mount the flag pole to the pole on the tongue jack. I secure it with a quick release pin.
Dave and Amy
Anthony-2005
Norah-2008
Sasha the weiner dog
Sadie the wonder dog
Spencer the shepherd dog
2016 Palomino Columbus 385BH Fiver "No Worries II"
2016 F350 Super Duty 6.7L PSD, CC, DRW, Lariat "Mistress II"
Ford 26.5k fifth wheel hitch