Eternabond ??

[Dtaylor]

I thought the stuff would have been thicker. It's only about a 1/16 inch thick. Anyway, I plan to use this where the back wall attaches to the roof. Can I overlap this stuff over the edge without it running down the outside of the wall?

[Dtaylor]

therink wrote:
There is a 1/2" or so plastic trim piece that runs side to side along the rear of my roof. I ran the tape right up to the back edge of the plastic trim (exactly even with the edge). I didn't curve it around the back edge as I didn't want it to be visible from the back (if this is what you are describing).

Yes. I think after taking a second look, I will probably do it like that so it is not seen.

[gbopp]

Don't worry about the thickness of the material.

It is a great product. Make sure you use a metal roller.

You will have no regrets with Eternabond.

[therink]

There is a 1/2" or so plastic trim piece that runs side to side along the rear of my roof. I ran the tape right up to the back edge of the plastic trim (exactly even with the edge). I didn't curve it around the back edge as I didn't want it to be visible from the back (if this is what you are describing).

[Fiverwheel]

You'll never regret using Eternabond. It's as good as advertised!

[army_guy1]

I used mine and overlapped edges. No problems at all.

[azdryheat]

It overlapped on my roof just fine. Love that stuff.