cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Help with name for a molding product?

jroden
Explorer
Explorer
I wanted to buy some stuff but don't know the name for it--I am replacing the countertop in my rv kitchen. On the rear of the counter where it attached to the wall of the trailer, I need some molding that prevents water from getting into the seam and wrecking the particleboard.

What's that stuff called? Is there a better way to seal off the back edge?
5 REPLIES 5

jroden
Explorer
Explorer
bradnailer wrote:
Rather than using molding, you can always use silicone caulking. To give the seam a good clean looking joint, mask above and below the joint, run a thin bead of caulking, smooth it out with your finger then remove the tape while the caulking is still wet.


brilliant, that's my plan many thanks

bradnailer
Explorer
Explorer
Rather than using molding, you can always use silicone caulking. To give the seam a good clean looking joint, mask above and below the joint, run a thin bead of caulking, smooth it out with your finger then remove the tape while the caulking is still wet.
2013 Jeep Grand Cherokee
2013 Coachmen Freedom Express 233RBS
Prior: Jayco Pop Up, Shasta Bunkhouse, Rockwood Pop Up

mark5w
Explorer
Explorer
Purchase metal back-splash trim here: formica metal trim
'13 2018 JAYCO EAGLE HT FIFTH WHEEL | 30.5CKTS- '13 Ford F150 SCREW - PullRite Superslide - Roadmaster Active Suspension

jroden
Explorer
Explorer
sgip2000 wrote:
Backsplash?


That's what I thought, the old stuff was a rubbery plastic molding that was stapled to the back side of the counter prior to instalation

sgip2000
Explorer
Explorer
Backsplash?