May-06-2014 08:26 AM
May-06-2014 11:01 AM
jhamlin wrote:There is no filter after the injection pump, so the comment about metal particles is correct.BroncosFan wrote:So if I understand what you're saying, I should be concerned that metallic particles could reach any of the injectors themselves? Shouldn't the fuel filter catch this, or is the filter between the fuel pump and the injector pump?
In the same link above when the engineering defect HPFP fails, metal particles likely will damage the injector ceramic ball valve.
May-06-2014 10:52 AM
n7bsn wrote:
Which engine? The 6.7L Powerstroke with the Bosch CP4 fuel-pump?
If so, have a complete fuel system check done. The Bosch CP4 has been a problem in every vehicle it's been used on (VW, Audi, Ford, etc)
May-06-2014 10:47 AM
BroncosFan wrote:
In the same link above when the engineering defect HPFP fails, metal particles likely will damage the injector ceramic ball valve.
May-06-2014 10:40 AM
May-06-2014 10:39 AM
May-06-2014 10:30 AM
May-06-2014 10:14 AM
May-06-2014 09:45 AM
May-06-2014 09:43 AM
May-06-2014 09:40 AM
May-06-2014 09:32 AM
May-06-2014 08:58 AM
May-06-2014 08:58 AM
May-06-2014 08:49 AM