First I want to give credit to member kerry4951 for his post and pics from a few years back. His 4 in 1 dinette mod was exactly what I wanted to do in my AF 1150. The wife and I love this TC and it had 'almost' everything we wanted in a TC when we were shopping except I preferred the U shaped dinettes I saw in some other brands and models. I just wasn't sure how to go about changing my stock dinette table to a more versatile U-shaped dinette. Kerry4951's photos gave me the visuals I needed.
After removing the stock table I contacted the OEM manufacturer of the dinette upholstery, Lippert Industries, and a wonderful lady there told me the OEM fabric was available and asked how much I would need. Each cushion has a fabric name and number which I could provide when it came time to order the fabric. I then contacted Jack, the owner of The Brass Tack Upholstery shop in Grand Rapids, MI. I took in a stock cushion from the TC along with measurements and a diagram of what I was trying to do and Jack told me how much fabric to order and quoted me a price for the seat cushion and two back cushions. I was very pleased with his work and the way everything matches. Unlike kerry4951, I did not have the dimensions in my slide to add a full height back cushion without it covering much of the window so I created a template for Jack that follows the lines of the window. Next, I contacted Michael at rv-sinks.com and gave him my dimensions for two custom made tables for this project. The tables turned out perfectly. I mounted the tables using the Sequoia table leg system. I like that the table pedestal mounts are flush fit and come with plastic covers when not in use.
Overall I am very pleased with how things turned out. 99% of the time the wife and I will probably utilize the u-shaped dinette with single table configuration but it is nice to know we can change things up to suit our needs or additional people at the table.
After removing the stock table I contacted the OEM manufacturer of the dinette upholstery, Lippert Industries, and a wonderful lady there told me the OEM fabric was available and asked how much I would need. Each cushion has a fabric name and number which I could provide when it came time to order the fabric. I then contacted Jack, the owner of The Brass Tack Upholstery shop in Grand Rapids, MI. I took in a stock cushion from the TC along with measurements and a diagram of what I was trying to do and Jack told me how much fabric to order and quoted me a price for the seat cushion and two back cushions. I was very pleased with his work and the way everything matches. Unlike kerry4951, I did not have the dimensions in my slide to add a full height back cushion without it covering much of the window so I created a template for Jack that follows the lines of the window. Next, I contacted Michael at rv-sinks.com and gave him my dimensions for two custom made tables for this project. The tables turned out perfectly. I mounted the tables using the Sequoia table leg system. I like that the table pedestal mounts are flush fit and come with plastic covers when not in use.
Overall I am very pleased with how things turned out. 99% of the time the wife and I will probably utilize the u-shaped dinette with single table configuration but it is nice to know we can change things up to suit our needs or additional people at the table.
blueglide wrote:Sango wrote:
Very nice job. We have a 2014 1150 AF and would love to do that to ours also. Is the seat cushion just sitting on a board that sits on the two running boards for the old table? What dimensions is the seat cushion?
The seat cushion is sitting on the smaller table top. The dimensions for the seat cushion are 26" x 18". Those dimensions are what I determined work for us. I didn't want the seating area to be too narrow but also not so wide that it encroached upon the other seating space. The table top under the cushion measures 28 5/8" x 18".
Thank you. Kerry4951 order his with the U shaped dinette correct?
Very nice job. We have a 2014 1150 AF and would love to do that to ours also. Is the seat cushion just sitting on a board that sits on the two running boards for the old table? What dimensions is the seat cushion?
