Would something like this work? i have a 43' toy hauler with 2 AC's. It struggles in the summer to keep the unit under 80-85 when it is not in the shade.https://rv-airflow.myshopify.com/
Late last year I notice a couple of my leveling jacks on my 2015 cyclone toyhauler were not retracting all the way when I tried to retract them If i pressed the button a second time they would retract fully. By the end of our camping season, I was h...
We got home about a week ago from a trip. I unhooked from the truck and ran to town for some errands. Later we opened the slides to get some things out of the kitchen and fridge. I then realized we had not put down all legs. Today my wife noticed we...
When staying overnight at a walmart or rest area that allows it, Can you put the slides out with only the front stabilizers down, or is best to unhook and auto level? I have hydraulic slides so all come out. I also have 6 stabilizer legs.
We will be leaving later this week on a 14 day trip starting north of Minneapolis with the final destination being Savannah GA. We will be pulling our 43' toy hauler. No toys except for bicycles.I plan on leaving Friday the 7th for Cave City KY and w...
Just to be sure, the rig levels without problem. It is only when retracting that I have a problem, and it only started toward the end of last summer. Does this sound the same as the issue you were dealing with? Does the fuse automatically reset? I...
Thanks for the information. I did check the fluid level last year before I put it in storage and the level was fine. I will try a dry lubricant. I do notice click coming from the hydraulic area before the jacks stop coming up. Soetimes I have to ...
enblethen wrote:It will depend on whther your slides are hydraulic motor driven or have cylinders.Normally a system containing cylinders, they all would be retracted.Bleeding can be either done by opening a small bleeder valve on each cylinder or by ...
yes, same system. I pulled the slides in and the fluid level did not go up much at all. SHould it be close to full with slides in and stabilizers raised? I am going to hook it up to the truck tomorrow and pull the stabilizer jacks in also. Will it b...
