Having problems making camera hot. I removed one of my top rear marker lights and it had two black wires going to a white wire and a black wire inside the RV. The camera has red and black wires...I assume the red is positive and the black is negative...
Buying a new Winnebago Minnie Plus 25 RKS and concerned about the low pin weight which is only 11-12% of total dry weight. If the water tank (50 gal) is in front of the axles, I can shift some weight to the pin. No concerns about the truck; only abou...
I have the King tailgater factory installed on the roof with auxiliary inputs for a portable unit in the wet bay. When my roof satellite is blocked by an obstruction and I hookup my portable King satellite to the auxiliary inputs, it seems to default...
Have Phaeton with three 15K ACs with separate controls and breakers for each one. The convection oven works on the 30 amp power, but only the fans will run on the ACs either separately or together. All work on 50 amp shore power (which is not availab...
For years I've been at my computer at 8AM EST to try to get a Florida State park site when first available 11 months in advance. Sometimes I got one, most times I didn't. I always felt that I was not quick enough when I didn't get one, but now I wond...
I used a volt meter set to 20 volts and read 9.5 volts. I thought the white was positive (14 ga wire) and the black was a 18 or smaller. I have always thought that white was opposite on 12V and 120v. When I reversed the wires the blue pairing light c...
thanks for all the help! I got the schematics from Winnebago and the water tank is right above the axles. It has 2 grey tanks with 2 separate sewer dumps which I don't like but can live with. We have a 42' cedar creek (13'7" tall) which we are keepin...
I haven't closed on it yet(waiting for the Hurricane) and got concerned before paying for it, but you both gave good advice. It seems that Winnebago would know of possible problems, but just covering my bases upfront. If the tank is located behind th...
dougrainer wrote:Tiffin uses the PCS system Power EMS system. It sheds the compressor's if the amp draw is too high on some Tiffin models. You don't state what year Tiffin. That would help. On other Tiffins it sheds the complete Power to the AC's. Re...
