so i am lowering the bed of my trailer by putting the axle over spring. i wanted to update the hardware and beef it up if possible. i went to croft trailer and they didnt have the exact u-bolt and plates i needed but did have some that were pretty cl...
sorry the pics were way too big, let me try again:Anyone ever do this and is it safe? Trying to lower my trailer for easier loading/unloading. Here is my "before":when relocating the axle though I had some issues with the center bolt and the axle not...
Anyone ever do this and is it safe? Trying to lower my trailer for easier loading/unloading. Here is my "before":when relocating the axle though I had some issues with the center bolt and the axle not laying flush since its a square/channel axle and ...
i have not done a ton of hauling/trailering and always got a little nervous when pulling something and so had some questions about a new project of mine. i have a little utility trailer and wanted to use it to haul a custom motorcycle i built. i upgr...
well as far as different bolts i have found some that are the correct size, but being as i am wanting to go axle over i was thinking it would be wise to beef up the hardware. using the current size would mean the thinner steel and i would want it as ...
tires are rated at 65mphas for welding a perch, i assume its not TOO tough of a task to measure/center holes on the perch (where the spring center bolts would sit into)? that was my concern with how difficult it would be to get it centered...
i had thought about welding a little piece of steel thicker than the height of the centering bolt and then drilling a hole as you described, yet i didnt know how difficult it would be to get it all centered and aligned again/drill ht holes in the cor...
