WE were on our way home to Mn when my transmission started to overheat 7.3 psd with E40d. Limped in to local Ford dealer. They said there diesel guy is on light duty and they are very busy.Might be able to look at it in 2- 3 days. Managed to get trai...
Were in the market for a 5er and trying to find ones that will clear a 12 foot door. the only one found so far is Grand design. Anyone no of any others.
We have been trying to check this one off our bucket list for the last couple of years. We are planning to leave the end of Aug. from Minnesota heading for Northern Washington working our way south to northern California visiting as many National Par...
I noticed on my Progresive Insurance Policy that it lists 30 days of use per year. I tried to find a definition of this in the contract but had no luck. Now that Im retired I could go over does this mean I would not be covered, how would they no how ...
I have a 98 P32 with 72000 miles and do all my own maintenance. While servicing the brakes on drivers front wheel I could clearly see the manifold was cracked but does not appear to be leaking. I understand this is a common problem with these engines...
Sidecar you better do a little more research. Mines got a drain plug in the torque converter and it may be hard for you to believe but there are a lot of guys on this site that no as much about proper maintenance as you do. And I must be doing Ok ca...
OD light started to flash had only travelled 15 miles since leaving Gulf Shores. MY temp gauge was not regestering. Pulled over and it smelled hot. Checked pan temp with infrared at 260. Let it cool and limped to dealer.
Ive changed fluid and filter every 50,000 since new.Including torque converter. Added larger cooler when we bought the 5er.130,000 now. Anyone recommend a good transmission shop.
Thanks to all for suggestions. I have a 12x12 door with 12,1" clearance and 14 ft side walls and a ramped entrance. I no the header can be raised if necessary. but would like to avoid it especially if we can find one we are happy with that will clear...
