Decided to be a little proactive and replace my water pump. After install of my SHurflo 4008 I determined that my check valve on the hw tank needed replacing. That statement is simplifying 2 hours of water system tests, looking for leaks etc) Wen...
ok - water strainer replaced - cavitation/water hammer 95% gone. Am happy about that. Will accept new performance behavior of this model of pump - just may take a while to get used to. I find this pump much quieter than the old model however lik...
Ok - things starting to make sense - but just so I understand this correctly... You're thinking leave everything as is? Or are you getting at trying to adjust bypass pressure down lower?
OEM was shurflo 2088-422-144 - 30 psi inlet, 45 shut off vs 55 for the 4008 as you mention. I've done a little trial and error on setting the pressure switch so not sure where it sits at the moment. What would be the consequence of going to a hi...
Well, not sure to feel relieved or dumb that things are working as intended. I'm at work so am unable to verify however I suspect that the leaky strainer will resolve the water hammer issues I've been experiencing. I am experiencing some of the a...
