I have a 6162 Model Norcold fridge. It works great with 110v, but when I try to use lp, it will ignite and immediately the flame shuts off. I dont know where to start. I have removed & cleaned all of the lp system. I checked valve, solenoid for restr...
I just got done cleaning the roof vent covers from my rv and it was a chore. They seem to hold quite a bit of tree fallings and they eventually work their way into the opening and down to the screens. Are they necessary? I drove by the rv dealer toda...
I have removed the old decals from my faded 94 C-Class. I want to do the Zep treatment, but I also want to replace the decals. I am wondering if I should first put a few coats of the zep before the decals or should I apply the decals & then coat it. ...
As it storms outside my house right now, I think I may leave them on. I will be the first one to forget they're open before the rain. I do like the idea of raising them a little. That might also help to blow them out while traveling. I imagine not to...
For my decals (on filon) I used a razor in a blade holder. I scraped about 1/4 to 1/2" of the stripe at a time. Dont try to remove the whole width of the blade at once, it will cause it to bite into the surface. A heat gun may help soften the vinyl, ...
Rob, I have heard both pros and cons about the zep. I have seen "pro" pics and videos of the use of zep, and only hearsay of the negative results. Do you have pics of the negative results, it would benefit a lot of us since it is pretty popular topic...
I guess, I was concerned that the decals would "over adhere" to the porous dry gelcoat, and that the decals would look weird if I applied zep over them, or have a bonding issue to the surface of the decals. I suppose, I could avoid applying the zep t...
