I was prepping my 2012 Amerilite 255BH for our annual fall trip when I ran the slide out and noticed the slide out seal was curled up on the ends and not down on the slide out roof. Is this an indication of the seal needing to be replaced or just ru...
Recently went on an extended trip 3500 miles with my TT, a 2012 Gulf Stream /Amerilite 255BH 28ft OAL and noticed excessive tire wear on the trailing axle. The lugs of the tread seem to be worn in a ramped pattern with the leading edge being normal a...
My unit is nearing the expiration of the warranty period and I have noticed that when I run the slide in or out the clutch on the drive mechanism seems to slip prematurely, often requiring someone to push on the dinette in order for the gasket to pul...
I recently went on an extended trip covering 3500 road miles with several 3-4 night stops along the way. at the first stop the water heater worked perfectly, at the second stop it worked perfectly until day three. As I was showering I heard what soun...
my slide out contains the dinette and sofa. the slide out was retracted and I was working under the sofa trying to bolster the support for the ends of the foam cushions that were getting stuck under the springs. I had inserted some pieces of corrugat...
The rubber wiper that wipes the roof of the slide as it goes in and out is the seal I am speaking of. The way I see it if it is laying with its wiping edge down on the roof of the slide it along with the side wipers prevents rain water from running b...
Yeah that's kinda what I thought. it sort of looks as if the seal got folded over the last time the slide was brought in instead of fliping over to ride flat on the roof and now that the slide is out the rubber seal seems to be retaining the memory o...
We were in the White Mtns in mid June we stayed at Tarry Ho Cottages and Campground in Twin Mountain NH site there was all grass w/gravel road. Not great but not bad either sites were level and we were the only ones in the campground during our stay ...
For those who need an explanation of my description of Nose down attitude, The coupler is welded to the tongue on my particular TT the tongue is equal to the top of the frame also the top of the rear bumper equals top of frame. the wear is definitely...
