After installing a lube plate the slide bar operates very hard when sliding over pin collar. Their is essentially no gap between flats on hitch and pin box now and its hard to tell when weight is off to unhitch. This makes no sense to me being I have...
My king pin does not seem to sit deep enough in the hitch causing slide bar to have trouble sliding over the bottom flange of the king pin. Anyone have an issue with this, are there certain king pin/hitch combos that don't seem to work well.
I Have a never used screen room that came with the rv we bought that attaches to the awning. Anyone find that these are worth the trouble to install. I don't know if I like the fact that I need to install these self adhesive mounts all over the side ...
cummins2014 wrote:Helped a fellow rv'er in Montana last summer, could not get his hitch to latch, it came down to removing his lube plate, it was beat up a little , and holding the kingpin up just enough that it wouldn't latch. It worked fine once th...
- My king pin total length is 3" - Length to bottom of pin groove is 2 1/2"- Bottom of hitch slide bar to top face of hitch is 2 3/16"That only leaves me with a 1/16" clearance between bottom of slide bar and pin groove. I'm getting to wonder if the ...
Islandman wrote:The screen rooms are nice if you're going to be camped in the same place for a few days, say at least 4-5 days in that it gives you additional outdoor room and space. When we had our 30 ft. Class A a few years ago, we used the Patty-...
