Looking for suggestions about options for adding air valve stem adapters on dual rear wheels? Bought a Jayco E-350 Class C with 225/75 16" tires a few months back and while winterizing noticed that the valve stems on the dual rear wheels are located...
I have a 2002 PT Cruiser and will be installing a Blue Ox base plate. I'd like some info on matching the height of the RV receiver and the base plate. The centerline of my hitch receiver on the RV is 19" above the ground and the literature on the ...
Need some advise on where to drill hole in firewall for running the BrakeBuddy Brake Away System cable? It looks quite crowded under the hood so I'm hoping someone has installed the cable or had it done and can give some advise on a location for the...
j-d wrote: iDeath Wobble is real. I drove a Ford Van that had it and the experience is NAS-TEE. Modified Wranglers get it. A couple pickup models have it too, right from the factory.I had the "Death Wobble" with a new 1976 Chevy van after going over ...
More great information here. Really appreciated the different approaches being offered here, providing lots to think about including proper gauges and chucks.For BruceMc, regarding those extension used on the outer tires, what are the wire clips use...
Thanks to everyone responding to my questions! I now understand that this is more than simply adding an extension and that the lasting solution is solid metal stems. I'll likely wait until the spring to have this done since I'm in the process of wi...
I had a similar question a while back, but for a PT Cruiser. Someone mentioned simply routing the wiring through the door opening and that is what I ended up doing because there didn't seem to be a good spot for drilling through the firewall. I brou...
I have a Skinny Mini brand 4-step folding ladder that I've used for indoor painting. I tested it this morning and it works fine for getting in and out of the overhead bed. With the rungs facing forward and me in a sitting position facing rearward, ...
