Less than two years out the plastic caps on my jack motors were disintegrating. After a year I can see the replacements are doing the same. I imagine the UV light is doing the damage. They start sloughing powdery residue, the center of the caps st...
Which would be the better route for pulling a heavy 5th wheel westbound from Sturgis, SD to Billings, MT? We're not overloaded by any of the gross weights but am near the limit for GVWR of my 07 Dodge 3500 5.9 CTD. The automatic tranny is downshift...
Will tow 36 foot DRV fifth wheel thru Phoenix to Seattle via California this January. Any suggestions for routes would be greatly appreciated as well as considerations for passes we'll encounter. The DRV is built for winter with good insulation, he...
Blew right front tire on 5vr, broke the rigid brake line for to my disc brake as well as the hydrulic connection to the leveling jack. Coast Net said they cannot find anyone to make brake or hydraulic repair at Roadside but will have tire changed an...
For the past six months, whenever a propane appliance is in use I have a pinging sound from around the propane tanks. Dealer replaced the regulator but the sound persists. This happens whenever the stove or oven burners are lit, the hot water heate...
Andy,I started with a 2007 990 wet bath on my 2007 Dodge 3500 dually with 4.10 rear, stock tires, BD exhaust brake and Firestone air bags. Never needed the airbags. The exhaust brake was the best addition I ever did for my truck. When the original ...
I like the ideas of a plastic specific paint and roughing up the surface for the paint to stick. Two of mine are so powdery I'm not sure anything will stick to them.
Rieco did send me new ones along wiht a replacement motor when one of mine failed just inside of the warranty peiod. Their customer service was great for me at that time. I do like the way the powdercoating is holding up comparred to the Happijacs ...
I wondered about the 303 type stuff but have never used it. How often would it need to be reapplied?I'd like a one-time action solution. Maybe a spray on rubberized coating or bedliner type product?
What sold me on the wet bath was the toilet position. In the dry bath configuration there wasn't room to take care of business. I've never had a problem with the walls sweating and we camp year round across the country. We use an expansion rod to ...
