Hello everyone, I’m trying to identify the correct tire pressure for like 39 foot class a RV. The tires have a listing on the side of them That says 110 psi, When I look inside the coach the wall where the specifications are shows 100 pounds of tire ...
Good morning,I am about to attempt performing scheduled maintenance on my Onan 7500 W quiet diesel generator which is installed in my 2003 coachman cross country delete 376 DS. It does not appear that this generator has a slide out to do the service ...
Hello, I am interested in installing some LED strip lights underneath my large side awning on my 2003 coachman cross-country 38 foot class a rv. Selecting the product seems pretty straightforward but what I’m struggling with is the termination of th...
Executive wrote:Ideally you want to know the four corner weights. That said, it's not convenient, not easy to locate someone/someplace to do that and just not practical. Alternatively just have each axle weighed and go from there. Most large truck st...
smlranger wrote:If you are handy and don't mind doing the work, you can remove the genset yourself. I dropped my Onan 7.5 Quiet Deisel genset out of a 2002 Winnebago Journey and did the full maintenance. I put some 6 X 6 timbers under the front jac...
lj2654 wrote:I had the 1000 hour service done on my coach in January 2017 at Cummins Ocala, Fl. They had to completely remove my generator from the coach to accomplish this service as it is not on a slideout tray. The outer covers had to come off to ...
beemerphile1 wrote:I drilled a hole thru the sidewall where a kitchen cabinet was on the inside. Added a switch and made my connections there. After you drill the hole hell did you transition the wire through the wall? How did you properly seal the o...
Tal/IL wrote:Here is what I used:***Link Removed***My LED strip is now my patio light.Edit: I should also add that I learned, when dealing with LED lights, polarity matters. I like that idea a lot, can I ask how you transitioned into the lighting fix...
