hello all, just took cover off camper and lo and behold on both "wings " i see corrosion/ bubbles on the alum siding??? i start digging and find the aluminum is just discentergrated , wood behind is fine.battery was removed all winter and nothing was...
hello all,my chevy came with a drop in bed liner,had tork lifts installed and reading through the brochure it states do not use w/bedliner. i have rubber 3/4 inch mats between camper(no sliding) should i take bed liner out?? confused, thanks pete
hello all,just uncovered and voila , noticed that the nose siding is bulging right at the siding seam. appears that it has become detatched from framing all down the siding seam. can i just repair with a few screws and seal or do have to rip off sidi...
hello all, i have an 06 lance 915 with the happijack tie down set up,which uses for the rear tie down an attachment on the rear bumper,my question is on the new gmc and chevys (there is a step on each corner where the tie downs used to be mounted)has...
hello all, in my 2006 gmc 2500 410 rear 4wd w lance 915 ive been getting around 12mpg for the past 6 yrs ,now im looking to upgrade to a 3500/f 350 maybe a diesil. just curious what kind of mileage are you getting ?? thanks pete
thanks guys ! ill check the jacks tonite and ill have to replace the siding on the wings. the wood was dry under the siding areas from what i saw. do you think it would do any good to install an anode to see if it stops and/or gets worse ? tahnks pet...
thanks all!, with the rubber live stock mats on top of the bed liner it seems to be ok, no sliding or noticable movement. still just wondering why?? pete
