kingman wrote:Well upon running my new champion csa40015 to test it out i have noticed the voltage to be a little high at 128 volts.Freq is at about 62 unloaded and drops to around 60 with a 2000 watt load.( 1500 watt heater and 500 watt worklight).W...
professor95 wrote:mitt wrote:prof-If you want an "off the shelf" method for this, check out the Magnecraft Voltage Measuring Relay 831VS-120ALooks nice. Any idea what the cost is? There are a couple of distributors in the Richmond area, guess I cou...
professor95 wrote:I have a few ideas on how to simply and inexpensively build an overvoltage shut down circuit. One "old technology" method is to use a small transformer to step down the 120 AC output to around 12 volts and isolate the power source,...
Wayne Dohnal wrote:Just discovered something. I have a new (Christmas gift)CEN-TECH 95683 that has a Peak Hold button. Can it capture the vary quick peak of a compressor at startup?If I can inject an opinion, it would be 'maybe', and I'd like to know...
O&S,That clamp meter should do the same thing as I mentioned above. Yes, you push the peak button, then turn on the compressor. If the compressor has a regular plug and cord on it, you can use a line splitter to separate the wires, and take your re...
