Aug-26-2021 07:12 AM
Aug-28-2021 08:06 AM
AdvancedQs wrote:time2roll wrote:
Have you looked at any Class C converted to 4WD? Or does the camper need to be removable?
Yes, that’s the idea. The camper should be removable so I can replace either of the components when one or the other breaks or ages out.
Essentially, a bigger truck camper using a commercial truck.
A class c doesn’t look great to me and it’s not too handy that the power/drive base is permanently attached to the RV part and typically is a gasoline powered van body.
I’m trying to use a diesel truck.
Aug-28-2021 07:49 AM
Aug-27-2021 11:05 PM
Aug-27-2021 10:29 PM
time2roll wrote:
Have you looked at any Class C converted to 4WD? Or does the camper need to be removable?
Aug-27-2021 09:47 PM
Aug-27-2021 08:27 PM
AdvancedQs wrote:
Nobody is really getting it.
It’s a truck camper for a huge commercial truck I’m trying to do.
A new truck (not this thing) and a pre-built new truck camper.
Like this. But brand new.
See why I was asking for 5th wheels with a truck camper style bed as a cab over instead of the huge room that usually lives above the pin?
It was so it could slide up over the cab and make a 20-25ft box a heck of a lot bigger since the bed wouldn’t take up all the space in it.
Does this exist off the shelf Igor is custom the only way?
Aug-27-2021 05:49 PM
Aug-27-2021 05:34 PM
Aug-27-2021 05:05 PM
Aug-27-2021 11:30 AM
Thermoguy wrote:
How about something like a horse trailer - check Featherlite, Sundowner, or I think the ATC line of trailers have a lower front for the fifthwheel or gooseneck.
Aug-27-2021 11:29 AM
JRscooby wrote:AdvancedQs wrote:
The overall height isn’t really the main concern. I’m finding plenty of different types of things that will fit on the truck.
The concern is how an over cab would work with the truck cab. That’s what missing here in terms of of finding a 5th wheel to fit and most likely is what will determine overall height.
It’s the height above the cutout of the forward area I need to minimize most of all.valhalla360 wrote:
I did a quick search and couldn't find any low profile 5th wheels. The shortest I could find was the Winnebago 2405BH. With an overall height of 11.5ft, 13.5 ft is typically the max legal height. That gives you 2ft plus the height of the suspension...so if your truck puts it less than 3.5ft off the ground, it should be viable.
PS: We've had both fiberglass and aluminum siding. Unless you spend a lot of time in hail areas, I prefer aluminum. The market has moved to fiberglass mostly because it looks pretty. There's certainly nothing dangerous about it.
- My Dad's 40yr old aluminum sided trailer was in perfectly good condition when it was sold. We had a 1997 that is in the same park we are in right now...siding is perfectly fine.
- Go wander an RV park and it's rare to find a 5yr or older fiberglass unit that doesn't has at least a small area of delamination.
Bet you will also have issues with the height of cab above the frame not fitting under the overhang. Another idea would be start with the bed off a U-haul, that has cab overhang. Add doors, windows and appliances, and BANG! you got your super C.
Aug-27-2021 10:32 AM
Aug-27-2021 07:11 AM
AdvancedQs wrote:
The overall height isn’t really the main concern. I’m finding plenty of different types of things that will fit on the truck.
The concern is how an over cab would work with the truck cab. That’s what missing here in terms of of finding a 5th wheel to fit and most likely is what will determine overall height.
It’s the height above the cutout of the forward area I need to minimize most of all.valhalla360 wrote:
I did a quick search and couldn't find any low profile 5th wheels. The shortest I could find was the Winnebago 2405BH. With an overall height of 11.5ft, 13.5 ft is typically the max legal height. That gives you 2ft plus the height of the suspension...so if your truck puts it less than 3.5ft off the ground, it should be viable.
PS: We've had both fiberglass and aluminum siding. Unless you spend a lot of time in hail areas, I prefer aluminum. The market has moved to fiberglass mostly because it looks pretty. There's certainly nothing dangerous about it.
- My Dad's 40yr old aluminum sided trailer was in perfectly good condition when it was sold. We had a 1997 that is in the same park we are in right now...siding is perfectly fine.
- Go wander an RV park and it's rare to find a 5yr or older fiberglass unit that doesn't has at least a small area of delamination.
Aug-27-2021 06:21 AM
valhalla360 wrote:
I did a quick search and couldn't find any low profile 5th wheels. The shortest I could find was the Winnebago 2405BH. With an overall height of 11.5ft, 13.5 ft is typically the max legal height. That gives you 2ft plus the height of the suspension...so if your truck puts it less than 3.5ft off the ground, it should be viable.
PS: We've had both fiberglass and aluminum siding. Unless you spend a lot of time in hail areas, I prefer aluminum. The market has moved to fiberglass mostly because it looks pretty. There's certainly nothing dangerous about it.
- My Dad's 40yr old aluminum sided trailer was in perfectly good condition when it was sold. We had a 1997 that is in the same park we are in right now...siding is perfectly fine.
- Go wander an RV park and it's rare to find a 5yr or older fiberglass unit that doesn't has at least a small area of delamination.