โMar-18-2015 10:21 AM
โMar-23-2015 05:24 PM
โMar-23-2015 03:30 AM
โMar-22-2015 03:17 PM
โMar-22-2015 08:02 AM
โMar-21-2015 05:59 AM
โMar-20-2015 06:48 PM
Gonecamping444 wrote:
What about fading?The sides have gelcoat so the cap must have gelcoat also,So can they even do it so you can't tell it was hit.I have taken good care of the camper & always waxed it,but iknow there must be a little fading,Ticks me off that's why i paid to store it inside to keep it nice,Oh well
โMar-20-2015 03:06 PM
โMar-20-2015 02:24 AM
โMar-19-2015 05:49 PM
Bumpyroad wrote:Yes.Terryallan wrote:Bumpyroad wrote:
yep boat repair services do it all the time but one concern is that in a boat you are usually talking about solid thick fiberglass. will they be working on that or on filon etc. on a backing?
bumpy
You do know the hull on most normal size fiberglass boats is only about 1/4" thick. the Gel coat is around 1/16"
I am very familiar with boats. and unless you get a RV like a molded egg type, you are talking about an entirely different material, for 95% of them out there. have you ever seen a boat delaminate?
bumpy
โMar-19-2015 04:10 PM
Bumpyroad wrote:Terryallan wrote:Bumpyroad wrote:
yep boat repair services do it all the time but one concern is that in a boat you are usually talking about solid thick fiberglass. will they be working on that or on filon etc. on a backing?
bumpy
You do know the hull on most normal size fiberglass boats is only about 1/4" thick. the Gel coat is around 1/16"
I am very familiar with boats. and unless you get a RV like a molded egg type, you are talking about an entirely different material, for 95% of them out there. have you ever seen a boat delaminate?
bumpy
โMar-19-2015 06:09 AM
โMar-19-2015 05:44 AM
โMar-19-2015 03:25 AM
Terryallan wrote:Bumpyroad wrote:
yep boat repair services do it all the time but one concern is that in a boat you are usually talking about solid thick fiberglass. will they be working on that or on filon etc. on a backing?
bumpy
You do know the hull on most normal size fiberglass boats is only about 1/4" thick. the Gel coat is around 1/16"
โMar-18-2015 06:33 PM