May-17-2014 06:44 PM
Jun-03-2014 04:28 AM
shadows4 wrote:
I took a pic yesterday when we hooked up to take the 5er to the storage lot. Thought some of you might be interested.
This shows how the tape on the pin box and the tape on the folded up tonno cover line up. That is what I look for when I hitch up. Thanks, John
May-27-2014 03:56 PM
May-24-2014 03:30 PM
May-22-2014 07:09 PM
JTrac wrote:bought the mirror at walmart and used some double sided tape.I leave it on the nose of the fiver.Its been there for 1.5 yrs with no problems.Very simple solution,works great and cost less then 5 bucks.rtazz17 wrote:
I have a bak flip cover too.I put a mirror on the nose of fiver to see hitch.Works great.5 bucks.
How did you attach it and do you leave it attached?
May-22-2014 02:11 PM
May-22-2014 11:15 AM
May-22-2014 05:34 AM
May-21-2014 09:12 PM
May-21-2014 07:49 AM
May-20-2014 07:58 PM
May-20-2014 07:50 PM
May-18-2014 06:50 PM
May-18-2014 02:38 PM
Pipeman wrote:
I just line up the truck with the trailer, back up so far, get out and have a look, adjust if necessary, back into the king pin. Now I have a dually so the rear end of the truck is as wide as the trailer, almost so it's not to difficult. With a SRW truck find reference points on the trailer with the sides of the truck and back in.
May-18-2014 02:17 PM