โOct-13-2016 07:29 AM
โOct-24-2016 02:57 AM
โOct-15-2016 05:01 AM
rhagfo wrote:lee worsdell wrote:
I pull a rushmore 41ft with my crew cab 2500 hd. regular box no slider. have at least 3ft to 4 ft from back window
Boy, talk about a broad statement!!
Have at least 3' to 4' from back of cab to what the nose,or pin location.
With a Standard/Regular bed best you will do with pin over axle is about 36" to the from the pin. Seeing how an 8' wide 5er, is 48" from pin to one side or the other, unless a space wasting rounded front cap keeps it narrower about 36' at a point about 36" back of the pin the cab and 5er will meet.
โOct-14-2016 06:00 PM
lee worsdell wrote:
I pull a rushmore 41ft with my crew cab 2500 hd. regular box no slider. have at least 3ft to 4 ft from back window
โOct-14-2016 05:12 PM
Dayle1 wrote:
Texas DMV has a different opinion, since 1989 I've only had short beds and the state always titled them as 'Truck'.
โOct-14-2016 03:37 PM
sayoung wrote:
Just my opinion, if its not 8 ft bed then its not a truck. I had a 2004 crew 3/4 short bed & was always needing more bed. That was both short beds, 1st & last.:S
โOct-14-2016 07:46 AM
โOct-14-2016 07:12 AM
โOct-14-2016 06:04 AM
โOct-13-2016 09:39 PM
โOct-13-2016 05:42 PM
โOct-13-2016 04:51 PM
โOct-13-2016 02:31 PM
โOct-13-2016 01:31 PM
โOct-13-2016 10:51 AM