May-18-2017 05:26 PM
Jun-01-2017 02:47 PM
Jun-01-2017 11:49 AM
Fisher Bill wrote:
Maybe just get a large toy hauler and you're ready to go?
Jun-01-2017 11:44 AM
bstark wrote:
An area of concern to me would be one I haven't seen mentioned on here and that's the pin box area of your fiver. Adding the leverage stress of pulling and stopping the combined weight of two trailers with 6k additional yanking on your pinbox is not something to ignore.
Consider carefully how that additional load from any angles it might be expected to impart to the rear of your fiver and what that translates to way up front on the pinbox, a notoriously problematic area if not thick stock and welded correctly.
Jun-01-2017 10:56 AM
May-31-2017 04:20 PM
May-29-2017 08:52 PM
May-28-2017 06:06 PM
May-28-2017 02:41 PM
May-28-2017 11:21 AM
Rally's attended so far-21
May-28-2017 11:06 AM
May-28-2017 10:54 AM
paul_arc wrote:laknox wrote:paul_arc wrote:
Hello all, I am looking to change my camping set up and go with a 5th wheel camper which will double tow my flat bed trailer. I am looking for which manufactures and companies have strong frames that could handle a trailer behind it. The trailer is approx 6k lbs loaded, so not too much weight. Tongue weight is pretty minimal.
I am just not too sure what decent manufactures to start doing research on.
I would say frame strength is priority #1.
#2 would be the quality of the trailer its self.
Thanks
Depending on what you get, you'd likely need to reinforce the FW frame all the way to in front of the front axle, to support a 600-800 lb tongue weight. A very few mfrs =might= consider beefing up a frame to handle this kind of weight, but they're very few and far between. Hell, give Space Craft a call and see what a full-on custom would cost. 🙂
Lyle
Thanks for the spacecraft name, its good to know a company that can do something custom.
May-27-2017 09:45 PM
May-19-2017 09:24 PM
May-19-2017 04:55 PM